Flexible Forms – Clothing Forms – Flexible Form Adult

December 9, 2008 by storefixtures
Flexible Form Adult

Flexible Form Adult

Put the fun back into display, the Fexible Forms are a great way to get your products noticed.  Unique configurations are possible with these bendable forms. Show them climbing a grid panel, or “flying” from the ceiling from wires. The lightweight forms can adapt to most any situation.

Traditional Clothing Forms  can be expensive, and hard to dress.  The Flexible Form is inexpensive, easy to dress, and fun to use.  You can bend them into most any position so their is always room for display. The standard round chrome base is available for both the Adult and Child size forms.

The Flexible Form Adult   and Child are both unisex display forms.

Door Alarms and Door Chimes – Store Security – Infra-Red Wireless System Entry Alarm

December 9, 2008 by storefixtures
Infra-Red Wireless System Entry Alarm

Infra-Red Wireless System Entry Alarm

Want to keep an eye on your front door, but can’t always be sitting there? The next best thing might be Door Alarms and Door Chimes  to announce your next guest.  A pleasant chime will sound each time the door is opened. Many units chime only at the door so the volume has to be set very high if you are in the back room and want to hear it. That can be startling for your customer.

One of the advantages of the Infra-Red Wireless System Entry Alarm  is that the chime may be placed in the backroom or another area of the store, and then quickly relocated to another location. The unit is wireless so installation is a breeze. You can buy additional receivers so it can be used on multiple doors with only one receiver. This unit can sound different chimes for each zone covered.

Store Security  is enhanced with the use of an entry announcer, and so is customer service. You can’t help a customer if you don’t know they are there.

Countertop Jewelry Display Cases – Jewelry Displays – Aluminum Glass Top Jewelry Display Case

December 9, 2008 by storefixtures
Aluminum Glass Top Jewelry Display Case

Aluminum Glass Top Jewelry Display Case

This Aluminum Glass Top Jewelry Display Case  with Security Side Panels allows you to display your contents while keeping them dust free and secure. The two latches on the lid helps keep you from losing any items. Overall dimensions: 34″W x 22″D x 3″

Grab the black plastic handle and you are on your way. This mobile display unit is ready to go when you are. The Security side panels keep prying fingers away from your merchandise. Countertop Jewelry Display Cases can cost hundreds of dollars, but this unit is not only sturdy, it is economical as well.

Jewelry Displays  that keep your merchandise safe are a must for trade shows sidewalk sales, or flee markets and these sturdy display units fit the bill perfectly.

Countertop Cell Phone Displays – Countertop Displays – Acrylic Electronic Device Station with Retractor

December 9, 2008 by storefixtures
Acrylic Electronic Device Station with Retractor

Acrylic Electronic Device Station with Retractor

It has been hard to find  nice looking Countertop Cell Phone Displays  that offer a little security and still make the phone the centerpiece of the unit. Many display units overpower the phones with bold colors or high tech gadgetry, but the black countertop display unit stays in the background and gives the phone or PDA center stage.

Countertop Displays  for phones have only two functions, show the phone, and secure the phone. The built in retractor is hidden in the body of the display behind the oversized cardholder. The cardholder can list the functions of your device, show a special price, or be used for name branding, it is up to you.  For added security you may add adhesive to the bottom of the unit, or drill a couple mounting hole to secure the unit to the shelf or countertop.

Use the Acrylic Electronic Device Station with Retractor  for your PDA’s as well. The multi function unit also has an available PDA cradle so you can use the same station one day for a phone, and the next for your PDA. The unit also comes with a slatwall “Z” bar on back for additional display opportunities.

Pegboard Acrylic Bins – Pegboard Hardware – Merchandising Cup Multi Bin for Slatwall/Pegboard

December 9, 2008 by storefixtures
Merchandising Cup Milti Bin for Slatwall/Pegboard

Merchandising Cup Milti Bin for Slatwall/Pegboard

Pegboard displays have come a long way in the last 10 years, it used to be that you could hang it on a hook, or set it on a shelf that was about it. Now with the new durable hybrid styrene, making Pegboard Acrylic Bins   is an economical attractive alternative.

Pegboard Hardware  is becoming more versatile for today’s needs. You need to get the most out of every square foot of your retail space and the improved display alternatives will help you display your merchandise in the most attractive manner possible.

Try using the Merchandising Cup Multi Bin for Slatwall/Pegboard  for small items that may be bulk dispensed. From Golf Tee’s to snack size wrapped candies this versatile display unit will get your merchandise noticed. This functional bin can go from pegboard, to slatwall and back again in seconds. The molded hooks fit quickly and easily into either application.

Pegboard Hooks – Pegboard Hardware – Crystal Clear Acrylic Pegboard/Slatwall Hook – 2″

December 9, 2008 by storefixtures
Crystal Clear Acrylic Pegboard/Slatwall Hook - 2"L

Crystal Clear Acrylic Pegboard/Slatwall Hook - 2"L

Using  standard Pegboard Hooks for carded merchandise is about as basic as it gets. Setting up a display to look  just a little different, a little better, requires a different approach.  If you are stuck with pegboard, your will have very few options other than zinc plated for most applications.

Pegboard Hardware  that has been powder coated is an option, but unless you have a large quantity it isn’t cost effective. The baskets, bins, and specialty hardware is readily available in black or white, but what about the hooks?

Crystal Clear Acrylic Pegboard/Slatwall Hook – 2″  is a nice option. Not ment for heavy merchandise, it is a delicate option to the standard metal “plain Jane”  hooks available at the hardware store. It gives your display that little something extra your merchandise demands. It works nicely for Jewelry or similar items and comes in a couple different lengths.

Round Rack – Racks – Round Rack 36″ Diameter

December 8, 2008 by storefixtures
Round Rack 36" Diameter

Round Rack 36" Diameter

Looking to pack some merchandise on one rack?  The Round Rack  is just the ticket for that. Many retailers use this style rack for closeouts, specials, or if they just have to much merchandise to fit onto a standard face out style rack

Racks for almost every specialty, but a round rack will work for almost everything. It truly is a heavy duty rack, made to be packed, stacked and even has an area for an additional display unit, or topper.

If you like the look, the Round Rack 36″ Diameter  can take anything your sales floor can dish out. Use a wire topper to hold more merchandise, or make a nice display on one of the wood toppers, or glass topper.

Poster Display – Racks – Poster Display 10 Wing, 20 Poster Display

December 8, 2008 by storefixtures
10 Wing 20 Unit Poster Display

10 Wing 20 Unit Poster Display

What could be better than finally being able to get that cluttered mess of posters off the sales floor and putting everything into a Poster Display? Maybe if you could find one that also shows all the images! The Poster Display 10 Wing 20 Poster Display unit does all that.  Show the images above in an easy to flip thru style displayer, and keep the for sale units organized in the handy storage sorting bin.

The Racks  that can keep you working with your customers instead of picking up posters off the tipped over can, or trying to find which rolled up poster is the same as the one  on display.

It is easy to show 20 different designs with the Poster Display 10 Wing 20 Poster Display Unit. 20 easliely identifiable bins keep the units sorted so the unit is self service. Ring up the sales, without ringing your hands over the damage done by not being able to find what your customer was looking for.

2 Way Rack – Racks – Two Way Rack with 2 Straight Square Arms

December 8, 2008 by storefixtures
Two Way Rack with 2 Straight Arms

Two Way Rack with 2 Straight Arms

The front of the garment is what you need to show, and show as many as possible in the least amount of space.  The 2 Way Rack  can help you do that tastefully. You need to show “faces” of course, but just making a wall of the faces of garments makes sure that trying to get everything noticed just gets nothing  noticed.

Show your garments on the Racks that lend themselves to tight spaces with lots of faces. The Two Way Rack lined up along the shoppers walking isle gives you the display power you are looking for without the overkill look off triple tiered in your face marketing.

Some retailer’s prefer a waterfall (down-slant arms with stops) style display, but most are using the Two Way Rack with 2 Straight Arms  to accommodate their needs. Use a magnetic cardholder on the back of the arm facing the isle to add even more interest, or show a special price.

Four Way Rack – Racks – Four Way Rack with 4 Straight Square Arm

December 8, 2008 by storefixtures
Four Way Rack with Straight Arms

Four Way Rack with Straight Arms

Use the workhorse of the industry, the Racks that pack in the merchandise and still showcase the garments. If you need a rack that can do the work of several, the Four Way Rack is the one for you. When you use the heavy duty 4 way rack you still show the face of the garment.

Showing the shoulders of the garment is fine if you sell uniforms, but for the rest of the clothing industry it just doesn’t work. The Four Way Rack shows 4 different designs by showing the face of the first garment. Many retailer’s will even use a body form on the front of the rack to showcase a special piece. No problem when you have 16″ of hang space.

The Four Way Rack with Straight Arms  is the number one rack sold today. Pack the merchandise, these heavy duty units can handle it. Add a caster set and your racks will move easily about your store. Add on arms are also a great idea, you can get 8 levels of hanging when you double tier each arm.